Timestamps are in GMT/BST.
| 03:36:14 | | raptor has joined |
| 03:36:17 | | ChanServ sets mode +o raptor |
| 04:28:57 | sam686 | Is ChanServ in this list of "users on channel #Bitfighter" on yours? This is what I see: http://sam686.maxhushahn.com/upload/chanserv.png |
| 04:39:36 | sam686 | I will try my own compiling on SDL2 to try to find joystick problems (which is a problem with windows only, but not linux) |
| 04:55:27 | sam686 | well, i think I found a dumb problem... Joystick::initJoystick(); doesn't work on windows before VideoSystem::init(); (in zap/main.cpp line 1025) |
| 04:55:54 | sam686 | but, Joystick::initJoystick(); works after VideoSystem::init(); |
| 04:57:00 | raptor | hi |
| 04:58:08 | raptor | ChanServ is a channel 'guard' so if everyone is disconnected, it stays and we don't lose the topic |
| 04:58:43 | raptor | sam686: i was wondering if that'd work with putting it after the VideoSystem |
| 04:59:01 | raptor | did you read that old mailing list post i mentioned? it seemed similar |
| 05:18:42 | sam686 | the old mailing list post is like, year 2004, a lot may have changed now.. |
| 05:19:17 | raptor | yes, but it detailed a problem with loading the wrong window too early |
| 05:19:46 | raptor | i was thinking about adapting it for SDL2 to see if it'd work, but it looks like you already found a solution.. |
| 05:42:21 | raptor | well, i'm off to bed |
| 05:42:30 | raptor | good night! |
| 05:43:39 | raptor | i responded to myself on the mailing list with the info that initializing them in a certain order fixed the problem |
| 05:43:54 | raptor | ok night |
| 05:43:59 | | raptor Quit () |
| 10:09:42 | | sam686 Quit (Ping timeout: 245 seconds) |
| 15:57:40 | | raptor has joined |
| 15:57:40 | | ChanServ sets mode +o raptor |
| 18:09:30 | raptor | awww man... Windows 8 is almost out now, too... |
| 20:14:35 | | sam686 has joined |
| 20:14:38 | | ChanServ sets mode +v sam686 |
| 20:18:49 | raptor | hi sam686 |
| 20:21:52 | raptor | hey, if you ever get the chance, can you test the joystick problem with this new SDL2 library?: http://sam686.maxhushahn.com/upload/SDL2.7z |
| 20:22:52 | raptor | it is patched with the fix from that old mailing list entry - i'm curious if it would work (but i'm at work and don't have a joystick) |
| 21:10:30 | sam686 | tried such patch, but same problem happens, error opening joystick (when trying to open joystick without first starting SDL window) |
| 21:11:06 | raptor | rats! |
| 21:11:21 | raptor | ok, it was just a gues.. |
| 21:11:23 | raptor | *guess |
| 23:45:15 | | raptor Quit () |
